Specifications and product: a digital display time or date, nice 

 2 built-in high-definition color / monochrome camera 

 3, door machine with there card features 

 4, along with visual doorbells and access control functions, is the upgrading of the ordinary door, preferred specifications: 170 × 110 × 38 



 Installation Instructions: 

 Remove the base plate, the plate is installed in the inlet side of a wall to control entrances and exits. Note that the upper and lower direction. 

 Attention! 

 On the power necessary to confirm the power supply voltage (DC12 ~ 15V) and power supply polarity 

 Read the instructions carefully before use! 



 Instructions: 


 Access control programming methods: 
 A. * 1234 # "key to enter the programming mode 

 (1) "* 1234 #" key (On Screen Display ------) 

 (2) Enter the 6 system password (default password: 123456) (screen display HHHHHH), press "#" key, the password is correct, (On Screen Display OH) and access control into system programming status; If you enter a wrong password, the screen flashes display twice (EEEEEE) to return to standby mode. 

 Two. "0" key, modify the system password 

 (1) "0" key (On Screen Display ------) 

 (2) six-digit password of the user input (such as: 888 888), (On Screen Display HHHHHH), press "#" to confirm (On Screen Display ------) are prompted to re-enter the same password, users enter the same password again (On Screen Display HHHHHH), press "#" key to confirm, On Screen Display (OH) short and long buzzer sound, Password changed successfully; If the two entries is not the same, the screen flashes the display twice (EEEEEE), back to programming mode. 

 Note: the system password users need to keep re-enter the system programming mode, enter the system password, if you forget the password, perform the initialization operation. Initialization only restore the system password to the factory default password (123456), and other data is not lost. 

 Initialization methods: 

 Turn off the power, the S16 jump to 2,3 feet. 
 Power buzzer continuous short beep (screen flashing display HHHHHH). 
 Then turn off the power to jump to S16 1,2 feet. 
 Power, buzzer-ming soon as initialization is completed. 

 3. "1" key, Jia Ruka + password to open the door users 

 (1) Press "1" key, (the system automatically assign this card a 4 numbers on the screen is displayed, such as 0006). 

 (2) read the logged in user card, the buzzer sound, (screen display ------) and then enter 3 to 6 user password, press # to confirm, the buzzer sounding cry, users add ; screen shows the number of the next system to continue to add users to exit the programming mode, press the * key to return to the On Screen Display (OH). 

 (Note: card + password to the user to open the door need the card reader and the correct input 6 of the door password!) 

 4. "2" button, the the Jia Ruka door type users 

 (1) Press "2" key, (the system automatically assign this card a 4 numbers on the screen is displayed, such as 0006). 

 (2) read the logged in user card, the buzzer sounding cry, and users to increase success. Continuous increase in users, the first card is read, then read the back of the card, read the last one exit can press *. 

 5 "3" key, add the type of user of the password to open the door 

 (1) Press "3" key, (the system automatically assign this card a 4 numbers on the screen is displayed, such as 0001). 

 (2) and then enter the 6 passwords (On Screen Display HHHHHH), press the # key to confirm (On Screen Display ------), prompts the user to re-enter the same password, enter the password again and press the # key to confirm. buzzer sounding users to increase success. 

 (Note: the password to open the door users can add up to 5, the system ID 0001 ~ 0005). 

 6. "4" key, and delete users 

 Press "4" key, (On Screen Display FFFFFF). 
 Read the four numbers you want to remove the card or enter the deleted user (screen display four numbers), press # to confirm the buzzer sounding cry, deleted successfully. 
 (On Screen Display FFFFFF) when press * to exit and return to programming mode; press the # key (On Screen Display ------), enter the six system password, press # key to confirm and delete all user data. 
 7. "5" key to modify the opening hours 

 (1) Press "5" key, the original opening hours. 

 The new opening hours of (2) Enter the two values ??(00 ~ 99 seconds), the buzzer sounding out door time setting. 

 8. "6" button, set the door mode and the screen display mode: 

 (1) "6" key to enter Set to open the door mode, the screen displays the original door models, such as On Screen Display (10). 

 (2) Enter the two door model code: the card door model is 10; the Calgary password to open the door mode is 11; card or password to open the door mode is 12; If you enter "88" screen standby "every minute"; If you enter "99 standby screen is displayed when the "date"; and press the # key to confirm the buzzer sounding cry, opened the door mode is set. 

 (Note: The factory set to open the door to read valid card, or 10 mode; screen standby "Minutes") 

 9. "7" key, set the date and time: 

 (1) Press "7" key to enter the mode, set the date and time (On Screen Display ------). 

 (2) in order enter the date weeks every minute ", such as, Sunday, April 12, 2009, 14:43:32, enter the 

 09 04 12 01 14 4332 ", press the # key to confirm the modification is successful. 

 (Note 1: Sunday 01, the other followed by 02 ~ 07) 

 10. "8" key, and modify user PIN codes 

 (1) "8" key, (On Screen Display ------), enter the old password, (On Screen Display HHHHHH), press # to confirm, if correct, (On Screen Display ------) prompted to enter the new user password. 

 (2) three to six input a new password (On Screen Display HHHHHH), press the # key to confirm the On Screen Display (------), prompts the user to re-enter the same password, enter the new password again and press the # key confirm the buzzer sounding cry, and the password changed successfully. 

 "*" Key to exit the system programming mode. 

 Buzzer sounding cry, and access control to exit the system programming mode, enter the normal operating state. 

 Note: If the buzzer to join the user's short beeps three times, indicating that the user is registered; If the buzzer intermittently sounding tones, said the store is full, are not longer login. If the buzzer is continuous short Ming three times, indicating that the card or password has been registered, you can not repeat log. If the buzzer sounded five times two short one sounding the alarm sound, said system memory read or write error. If you encounter a typo or operational errors, and access control will be error alarm blew three times to exit to normal working state. 


 Access control using the method 
 Close to the user card access control or continuous input of 6 user PIN codes, the buzzer sounding cry (screen displays OPEN), open the door successfully set opening hours, the screen displays the same. 
 If the buzzer short beeps three times, the screen flashes the display twice (EEEEEE) said the card or the password for illegal user can not open the door. 
 If a user card + password type (when logged-on user settings), requiring the correct reader, if it is a valid card, the buzzer blew out (On Screen Display ------), within five seconds of households input corresponding to the user's password, the password is correct, open the door (screen displays OPEN), this time (3 seconds) followed by enter "#" (On Screen Display ------), users enter a new password. (On Screen Display ------), are prompted to re-enter the password twice, enter the correct (the screen displays OH) successfully modified the original password